HOW TO: Install Taste ROM Android 4.1 Jelly Bean on Samsung Galaxy Y S5360

We have put together a detailed step-by-step instructions guide onhow to install Taste ROM Android 4.1 Jelly Bean custom firmware on Galaxy Y S5360. If you are used to installing custom ROMs on your Galaxy Y S5360, then this should not be any different for you.
However, for beginners, you need to root your Samsung Galaxy Y and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

To Remember:

• This tutorial is only for installing Taste ROM Android 4.1 ROM on Samsung Galaxy Y S5360. Please do not try on any other Galaxy Y variants.
• This tutorial will wipe out all your data. Proceed at your own risk.
• Perform a Dalvik Cache wipe before proceeding from the recovery mode.
• Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
• Make sure you backup all your data in your phone before proceeding.

Complete Step-By-Step Instructions:

NOTE: Jelly Bean Taste is a custom ROM based on Android 2.3.6 DXLF1 and is heavily modded and several tweaks have been installed to look Jelly Bean Android 4.1.

Step 1 - Download Taste ROM Android 4.1 ROM for Galaxy Y to your computer.

Step 2 - Connect and mount your Galaxy Y USB memory on your computer using the USB cable.

Step 3 - Now copy/paste the downloaded Android 4.1 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode. 

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”  Use the Power button to select everything while in the Recovery Mode.

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 4.0 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” 

Your Galaxy Y S5360 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Y should now have Taste ROM Android 4.2 Jelly Bean custom ROM installed on your phone! Go to Settings > About phone to verify.

Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.